K7VM2 USB DRIVER

Before installing the expansion card, read the documentation of the expansion card and make necessary hardware settings for the card. If the jumpers JL1 and JR1 are short see fig. It's a community-based project which helps to repair anything. Match the red marking on the floppy ribbon cable with Pin1. Hold components by the edges and do not touch the ICs 4. The lever clicks on the side tab to indicate that it is locked.

Uploader:	Saran
Date Added:	18 October 2014
File Size:	34.58 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	58971
Price:	Free* [*Free Regsitration Required]

For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink vendors. If the 4 USB 2. K7v2 data in CMOS includes system setup information such as system password, date, time, and system setup parameters.

While CPU overheat is detected, the system will automatically shutdown.

ASROCK K7VM2 Installation guide |

Before installing the expansion card, read the documentation of the kv7m2 card and make necessary hardware settings for the card. Supports 2 floppy disk drives Audio: Please check if the CPU fan on the motherboard functions properly before you resume the system.

Because the motherboard specifications and the BIOS software might be updated, the content of this manual will he subject to change without notice In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice.

Align the card connector with the slot and press firmly until the card is completely seated on the slot.

Remove the bracket facing the slot that you intend to use. This Quick Installation Guide contains introduction of the motherboard and step-bystep installation guide for new DIY system builders.

ASRock assumes no responsibility for any errors or omissions that may appear in this guide. For detailed information, please refer to page 13 of user Manual in the Support CD.

It's a community-based project which helps to repair anything. The AGP slot is used to install a graphics card. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Hold components by the edges and do not touch the ICs 4. When you connect speakers in back panel and front panel at the same time, 1. DO NOT place jumper caps over these connectors.

No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. If both jumper caps on JL1 and JR1 are removed see fig.

Asrock K7VM2 V3.X Motherboard socket A 462 AGP VGA 2x PCI AMR LAN IDE USB DDR RAM

The lever clicks on the side tab to indicate that it is locked. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. Micro ATX form factor 9.

Please remember to remove k7gm2 paper clip or the jumper cap after clearing the CMOS. Unlock a DIMM slot by pressing the retaining clips outward.

If the jumpers JL1 and JR1 are short see fig.

USB Audio Device driver free download for windows - VIA - K7VM2

The Support CD that came with the motherboard contains necessary drivers and udb utilities that will enhance motherboard features. If no jumper cap is placed on the pins, the jumper is "OPEN". Match the red marking on the floppy ribbon cable with Pin1. Products and corporate names appearing in this guide may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent ,7vm2 infringe.

Please follow the figures above to set the CPU front side bus frequency. Install CPU fan and heatsink. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages including damages for loss of profits, loss of business, loss of data, interruption of business and the likeeven if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product.

Usg setting of the CPU front side bus frequency of this motherboard is by means of the adjustment of jumper-setting. Whenever you uninstali any component, place it on a grounded usg pad or in the bag that comes with the component.